StopTech Brake Rotors for FNF Knuckles
Pair of rear StopTech Sport Cross-Drilled Rotors for our fabricated knuckles.
- Improves Braking Power
- Increased Initial “Bite”
- Cross Drilled to Prevent Glazing
- Vented Design Improves Heat Dissipation
- StopTech Power Alloy Metallurgy
- Intended for Street Use
- Outer Diameter 11.65" (295mm)
- Rear Pair - Includes Driver and Passenger Side Rotors
These rotors shed heat thanks to their vented design, with curving internal vanes. They’re also quite corrosion resistant thanks to an electrostatic e-coating on the hat, edges, and other places.
Topnotch 1-Piece Build. High quality cast iron blanks form the starting point for construction of the StopTech Sport Cross-Drilled Rotors. These vented rotors incorporate greater than average carbon content so their tensile strength is boosted and they won’t fracture under powerful stress. Black e-coated finish covers the surface of the hats, edges, and vanes to protect them against rust. Precision cross-drilling ensures maximally effective function.
Handles Heat, Wet, and Brake Dust Effectively. The features of the StopTech Sport Cross-Drilled Rotors work together to produce extremely strong braking power and shortened stopping distances compared to stock, including in very wet conditions. The cross-drilling keeps the faces clean so that there’s always vigorous contact and friction between pad and rotor. The amount of gases the cross-drilling needs to deal with is lessened a lot by the cooling effect of the vents and vanes. Directionally curved to match the passenger and driver sides, the vanes spin air into the vent channels at the center and out again at the edges after absorbing heat. Running cool, resisting stresses, and braking strong are the StopTech rotors’ big advantages.
Direct Bolt-On. Fitment of the StopTech Sport Cross-Drilled Rotors can be carried out on a plain direct-fit replacement basis. They work with any wheels, brake calipers, and other components that will function with the stock brake rotors.
Provided as a Pair. The kit of StopTech Sport Cross-Drilled Rotors is made up of (2) 11.65” cross-drilled rear rotors.
Not Manufacturer Warranted. The StopTech Sport Cross-Drilled Rotors are not warranted or guaranteed in any fashion. When these components are bought, they are accepted “with all faults” and “as is,” according to StopTech company policy.